New power LED headlight with parking light function and clear glass. The oval metal housing, has a chrome-plated, asymmetrical only approved for right-hand traffic - reflector, E-approved.
Dimensions :
Housing diameter: 200 mm
Diameter of headlamp insert: 178 mm
Depth of housing: 160 mm
Distance between mounting holes (centre - centre): 170 mm
Distance between mounting hole (centre) and end of housing: approx. 90 mm
Mounting: laterally with M8 screws
Connections:
3-pin plug type A, female Cable length 210 mm (included in delivery)
Green cable = ground (-)
Blue cable = high beam (+)
White cable = low beam (+)
On the reflector in the headlamp housing:
Black cable = ground (-)
Red cable = low beam (+), power consumption: at 12 volts 18 watts, approx. 1132 lumens.
White cable = high beam (+), current consumption: at 12 volts 30 watts, approx. 1770 lumens.
Brown cable = parking light (+), power consumption: at 12 volts 0.7 watts.
Scope of delivery: 1 piece, including 3-pin mating connector
Note:
Use asymmetrical, only approved for right-hand traffic.
 |
More safety due to considerably better light with less power consumption at the same time. A clear relief for the alternator, which is often already at its limit. Especially the older models with Bosch and Saprisa alternators were not designed for operation with continuous light. The service life is also many times that of a normal H4 bulb. |
 |
Not for left Hand traffic! |